电器与能效管理技术 ›› 2022, Vol. 0 ›› Issue (6): 6-9.doi: 10.16628/j.cnki.2095-8188.2022.06.002

• 综述 • 上一篇    下一篇

在线监测中真空断路器刚合点估算方法综述

刘成, 戴道立, 王宁, 陈玲玲, 陈季川   

  1. 上海电器科学研究所(集团)有限公司, 上海 200063
  • 收稿日期:2022-01-23 出版日期:2022-06-30 发布日期:2022-07-21
  • 作者简介:刘 成(1989—),男,工程师,主要从事电器智能化技术及应用、电磁场数值模拟研究。|戴道立(1981—),男,工程师,主要从事船舶电气研究。|王 宁(1984—),女,高级工程师,主要从事船用中压电器研究。
  • 基金资助:
    中央引导地方科技发展资金项目(YDZX20213100003004)

Review on Estimation Methods of Vacuum Circuit Breaker’s Moment-Close Point for Online Monitoring

LIU Cheng, DAI Daoli, WANG Ning, CHEN Lingling, CHEN Jichuan   

  1. Shanghai Electrical Apparatus Research Institute(Group) Co.,Ltd.,Shanghai 200063,China
  • Received:2022-01-23 Online:2022-06-30 Published:2022-07-21

摘要:

为了获取真空断路器的机械特性信息,需要对其进行参数测量和状态分析,而计算断路器合闸速度需要获得动、静触头的刚合点。首先介绍了几种断路器机械特性测试用的传感器,梳理比较了现有的几种断路器刚合点提取方法,明确各个方法的优缺点,并结合滤波求导法提取某型断路器刚合点,同时与真实的刚合点进行对比。在在线监测应用中,所述几种方法均可以提取断路器刚合点,实际应用中要有所取舍。

关键词: 断路器, 刚合点, 合闸线圈电流, 触头压力, 振动信号, 位移曲线

Abstract:

In order to obtain the mechanical characteristic information of the vacuum circuit breaker,it is necessary to perform the parameter measurement and state analysis,and to calculate the closing speed of the circuit breaker.It is necessary to obtain the moment-close point of the moving and static contacts.First,several methods for testing the mechanical characteristics of circuit breakers are introduced,and the existing methods for extracting the moment-close point are compared.The advantages and disadvantages of each method are clarified.Combined with the filter derivation method,the moment-close point of a certain type circuit breaker is extracted and compared with the real moment-close point.For online monitoring applications,the above methods can extract the moment-close point of the circuit breakers.There must be some trades-off in practice.

Key words: circuit breaker, moment-close point, closing coil current, contact pressure, displacement curve

中图分类号: