电器与能效管理技术 ›› 2021, Vol. 0 ›› Issue (2): 48-53.doi: 10.16628/j.cnki.2095-8188.2021.02.010

• 检测与试验 • 上一篇    下一篇

新型交流接触器电寿命试验分析系统的设计

王天阳, 郑哲, 张旭, 任万滨   

  1. 哈尔滨工业大学 电气工程及自动化学院, 黑龙江 哈尔滨 150001
  • 收稿日期:2020-12-04 出版日期:2021-02-28 发布日期:2021-03-25
  • 作者简介:王天阳(1996—),男,硕士研究生,研究方向为电器触点材料电性能试验技术。|郑哲(1997—),男,博士研究生,研究方向为触点材料的抗电侵蚀性能。|张旭(1992—),男,博士研究生,研究方向为继电器触点熔焊失效分析。
  • 基金资助:
    *国家自然科学基金项目(51777039)

Design of Novel Electrical Endurance Experimental System for AC Contactor

WANG Tianyang, ZHENG Zhe, ZHANG Xu, REN Wanbin   

  1. School of Electrical Engineering and Automation,Harbin Institute of Technology,Harbin 150001,China
  • Received:2020-12-04 Online:2021-02-28 Published:2021-03-25

摘要:

交流接触器的切换负载能力及其可靠性的准确评估,极大地依赖于电寿命试验方法与系统。为兼顾研究交流接触器中触头材料的优选,设计了一种新型交流接触器电寿命试验分析系统,不仅可监测其动作特性参数,还可调节触头开距与磁间隙。应用系统分析了触头开距对接触器动作特性的影响,并初步观测了25 000次动作的电性能参数变化趋势。

关键词: 交流接触器, 电寿命, 触点, 失效分析

Abstract:

The accuracy of assessment in switching load capacity and reliability of AC contactor greatly depends on the electrical lifetime test method and system.Considering the optimization of contact materials,this paper introduced a novel electrical endurance experimental system for AC contactor,which is able to monitor the operating characteristic parameters of contactor.Moreover,the contact gap and magnetic gap can be flexibly adjusted.The system was used in analyzing the influence of contact gap on the operating characteristics,and the variations in electrical performance parameters.

Key words: AC contactor, electrical lifetime, contacts, failure analysis

中图分类号: