电器与能效管理技术 ›› 2024, Vol. 0 ›› Issue (10): 65-71.doi: 10.16628/j.cnki.2095-8188.2024.10.011

• 仿真技术应用 • 上一篇    下一篇

基于饱和磁路的直流断路器磁脱扣器特性仿真研究

韩伟, 朱忠建, 衣陈晨, 孟凡非, 邱中军, 奚杰   

  1. 江苏大全凯帆电器有限公司, 江苏 镇江 212200
  • 收稿日期:2024-06-15 出版日期:2024-10-30 发布日期:2024-12-12
  • 作者简介:韩 伟(1986—),男,高级工程师,主要从事直流开断技术研究。|朱忠建(1978—),男,高级工程师,主要从事直流开断技术研究。|衣陈晨(1991—),男,工程师,主要从事直流开关设备的设计与制造工作。

Simulation Study of DC Circuit Breaker Magnetic Release Characteristics Based on Saturation Magnetic Circuit

HAN Wei, ZHU Zhongjian, YI Chenchen, MENG Fanfei, QIU Zhongjun, XI Jie   

  1. Jiangsu Daqo Kfine Electrical Co., Ltd., Zhenjiang 212200, China
  • Received:2024-06-15 Online:2024-10-30 Published:2024-12-12

摘要:

磁脱扣器是直流断路器的关键部件,直接决定直流断路器的短路保护性能。对基于饱和磁路的磁脱扣器进行建模和特性仿真计算,获取不同电流下的磁力曲线,并与传统的单磁路磁脱扣器进行特性对比分析。结果表明,基于饱和磁路的磁脱扣器具有更高的脱扣精度和动作可靠性,为磁脱扣器的设计优化提供了依据。

关键词: 直流断路器, 磁脱扣器, 饱和磁路, 仿真研究

Abstract:

The magnetic release is the key component of DC circuit breaker,which directly determines the short circuit protection performance of DC circuit breaker.The magnetic release based on saturation magnetic circuit is modeled and simulated to obtain the magnetic curve of different currents,and the characteristics of the magnetic release based on saturation magnetic circuit are compared with the traditional single magnetic circuit magnetic release.The results prove that the magnetic release based on saturation magnetic circuit has higher release accuracy and operation reliability,which provides a basis for the design and optimization of magnetic release.

Key words: DC circuit breaker, magnetic release, saturation magnetic circuit, simulation study

中图分类号: