[1] LIAO C M,TSENG S.T.Optimal design for step-stress accelerated degradation tests[J].IEEE Transactions on Reliability,2006,55(1):59-66. [2] YE Z S,WANG Y,TSUI K L,et al.Degradation data analysis using wiener processes with measurement errors[J].IEEE Transactions on Reliability,2013,62(4):772-780. [3] WANG X,XU D.An inverse gaussian process model for degradation data[J].Technometrics,2010,52(2):188-197. [4] MEEKER W Q,ESCOBAR L A,LU C J.Accelerated degradation tests:modeling and analysis[J].Technometrics,1998,40(2):89-99. [5] TAN C M,SINGH P.Time evolution degradation physics in high power white LEDs under high temperature-humidity conditions[J].IEEE T Device Mat Re,2014, 14(2):742-750. [6] PATEL M,SKINNER A R.Thermal ageing studies on room-temperature vulcanised polysiloxane rubbers[J].Polym Degrad Stabil,2001,73(3):399-402. [7] HUANG J L,GOLUBOVIC D S,KOH S,et al.Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test[C]//Reliab Eng Syst Safe,2016(154):152-159. [8] TANG L C,YANG G,XIE M.Planning of step-stress accelerated degradation test[C]//Annu Reliab Maintainab Symp,2004:287-92. [9] WANG Y,ZHANG C,CHEN X,et al.Simulation-based optimal design for accelerated degradation tests[C]//ICRMS,2009:1302-1306. [10] 郭春生,谢雪松.加速试验中失效机理一致性判别方法[J].半导体学报,2006,27(3):560-563. [11] 王前程,陈云霞.加速度计加速退化机理一致性边界确定方法[J].北京航空航天大学学报,2012,38(11):1512-1516. |