电器与能效管理技术 ›› 2020, Vol. 589 ›› Issue (4): 89-92.doi: 10.16628/j.cnki.2095-8188.2020.04.016

• 电能质量 • 上一篇    下一篇

适应配电网动态电压恢复控制的跌落量检测方法研究*

姜华1, 白金花1, 沈兴来1, 滕松1, 胡昇2   

  1. 1.国网江苏省电力有限公司 徐州供电分公司,江苏 徐州 221000;
    2.南京工程学院,江苏 南京 211167
  • 收稿日期:2019-12-29 出版日期:2020-04-30 发布日期:2020-04-30
  • 作者简介:姜 华(1977—),男,高级工程师,主要从事电力系统及其自动化研究。白金花(1978—),女,高级工程师,主要从事电力系统及其自动化研究。沈兴来(1983—),男,高级工程师,主要从事电力系统及其自动化研究。
  • 基金资助:
    * 国家电网有限公司科技项目(J2018076)

Research on Drop Detection Method Adapted to Dynamic Voltage Recovery Control of Distribution Network

JIANG Hua1, BAI Jinhua1, SHEN Xinglai1, TENG Song1, HU Sheng2   

  1. 1.Xuzhou Power Supply Branch,State Grid Jiangsu Power Co.,Ltd.,Xuzhou 221000,China;
    2.Nanjing Institute of Technology,Nanjing 211167,China
  • Received:2019-12-29 Online:2020-04-30 Published:2020-04-30

摘要: 针对大量分布式电源接入后的工业园区配电网电压跌落检测问题进行深入分析,开展了基于多dq坐标旋转变换的正负序分离法和基于S变换法的详细设计研究。最后,为验证方法的正确性,在MATLAB/Simulink中搭建了仿真模型,结果表明基于多dq坐标旋转变换的正负序分离检测法更满足电压恢复控制的实时要求,为工程设计奠定理论基础。

关键词: 电压跌落, dq坐标系旋转变换, S变换, 动态电压恢复

Abstract: The problems of voltage sag detection of the industrial park distribution network after a large number of DGs were analyzed.The detailed design research based on the positive-negative sequence separation method of multi-dq coordinate rotation transformation and the S-transform method was carried out.Finally,in order to verify the correctness of the method,a simulation model was built in MATLAB/Simulink.The results show that the positive and negative sequence separation detection method based on multi-dq coordinate rotation transformation meets the real-time requirements of voltage recovery control,which lays a theoretical foundation for engineering design.

Key words: voltage sag, multi-dq coordinate rotation transformation, S-transform, dynamic voltage recovery

中图分类号: