电器与能效管理技术 ›› 2020, Vol. 586 ›› Issue (1): 51-57.doi: 10.16628/j.cnki.2095-8188.2020.01.009

• 直流技术 • 上一篇    下一篇

交直流配电网关键设备可靠性评估研究*

丁纪明1, 段浩伟2   

  1. 1.国电南瑞科技股份有限公司, 江苏 南京 211106;
    2.南京邮电大学, 江苏 南京 210023
  • 收稿日期:2019-10-11 出版日期:2020-01-15 发布日期:2020-03-26
  • 作者简介:丁纪明(1973—),女,工程师,主要从事交直流配电网优化运行等研究。段浩伟(1996—),男,硕士研究生,研究方向为交直流配电网优化运行等。
  • 基金资助:
    * 电动汽车充放电故障智能诊断与安全预警关键技术及运维服务体系研究(SGJSDK00JLJS1900209)

Study on Reliability Evaluation of Key Equipment in AC/DC Distribution Network

DING Jiming1, DUAN Haowei2   

  1. 1.NARI Technology Co.,Ltd., Nanjing 211106, China;
    2.Nanjing University of Posts and Telecommunications, Nanjing 210023, China
  • Received:2019-10-11 Online:2020-01-15 Published:2020-03-26

摘要: 为应对城市电网站点走廊有限和负荷密度高的矛盾,发展交直流配电网是解决问题的一个重要发展趋势。但是中压直流断路器、直流变压器等关键设备的技术不成熟并且建设标准不完善,有必要针对设备以及配电系统进行可靠性水平评估分析。通过分析交直流配电网可靠性影响因素,建立交直流配电网关键设备的可靠性评估模型并计算可靠性参数,基于最小割集法的配电系统可靠性评估方法并以某交直流配电网为例进行了配电网系统可靠性评估。从评估结果可知,与传统交流配电网相比,柔性交直流配电网的多端口双向连接特性在实现全系统灵活调控的基础上,进一步提升了系统整体的供电可靠性。

关键词: 交直流配电网, 可靠性评估, 柔性电力电子变电站, 最小割集法

Abstract: In order to deal with the contradiction of limited station corridor and high load density of urban power grid,the development of AC/DC distribution network is an important development trend to solve the problem.However,the technology of key equipment such as medium voltage DC circuit breaker and DC transformer is not mature and the construction standard is not perfect,so it is necessary to evaluate and analyze the reliability level of equipment and distribution system.In this paper,by analyzing the factors that affect the reliability of AC/DC distribution network,the reliability evaluation model of key equipment in AC/DC distribution network was established and the reliability parameters were calculated.The reliability evaluation method of distribution system is based on the minimum cut set method.According to the evaluation results,compared with the traditional AC distribution network,the two-way connection characteristic of flexible AC and DC distribution network further improves the overall power supply reliability of the system on the basis of realizing the whole system’s flexible control.

Key words: AC/DC distribution network, reliability evaluation, flexible power electronic substation, minimum cut set

中图分类号: