Design on Heat Dissipation Structure of High Power Electrical Control Box

doi:10.16628/j.cnki.2095-8188.2023.04.010

Abstract

Abstract:

Based on the differential equation of heat conduction,fluid motion control equation,and radiation heat transfer equation,a mathematical model of coupled heat transfer in an electrical control box is established.The three-dimensional temperature field and airflow field are numerically calculated under steady-state conditions of the electrical control box.The relevant temperature rise tests are carried out.The calculated results are in good agreement with the test results.The error meets the actual engineering requirements.Finally,the highest temperature portion and heat dissipation law of the current carrying circuit are pointed out.The proportion of radiation heat exchange in the total heat dissipation of the current carrier circuit is calculated.The temperature rise of the current carrying circuit is simulated for different current carrying circuit emissivity and different heat dissipation box structures.The results show that improving the surface emissivity of the current carrying circuit and changing the top brim to open the shutter can effectively reduce the temperature rise of the electrical control box.

Key words: control box, heat dissipation, thermal simulation, temperature rise

CLC Number:

TM592

GUO Qing. Design on Heat Dissipation Structure of High Power Electrical Control Box[J]. LOW VOLTAGE APPARATUS, 2023, 0(4): 61-66.

Figures/Tables 8

References 11

[1]	JIANG Y F, JI L P, TIAN R G, et al. Multi-field coupling simulation and temperature prediction method of plum blossom contact in high voltage switchgear[J]. Journal of Applied Science and Engineering, 2022(5):905-913.
[2]	吴泳聪, 阮江军, 黎鹏, 等. 开关柜温度-流体场优化计算研究[J]. 电机与控制学报, 2020, 24(7):1-11.
[3]	SZULBORSKI M, APCZYNSKI S, KOLIMAS U. Thermal analysis of heat distribution in busbars during rated current flow in low-voltage industrial switchgear[J]. Energies, 2021, 14(9):2427. doi: 10.3390/en14092427
[4]	柯红海, 于志国, 袁杰, 等. 中压开关柜温升特性的多物理场耦合仿真研究[J]. 广东电力, 2022, 35(10):125-132.
[5]	黄宪武, 唐锦尧, 张庆波, 等. 基于多物理场有限元的开关柜温升仿真研究[J]. 浙江电力, 2020, 39(7):18-22.
[6]	孔军廷. 基于温升试验的载流铜排与接触器连接结构优化[J]. 重型机械, 2022(2):84-87.
[7]	王国庆, 熊俊, 焦夏男, 等. 户外1000A低压熔断器温升特性研究[J]. 电器与能效管理技术, 2021(6):36-40.
[8]	王海锋, 刘宁. 针对直流输电换流变压器冷却器控制箱接触器发热及异响缺分析研究与优化治理[J]. 电气技术与经济, 2019(2):1-7.
[9]	夏浩瑄, 刘子胥, 王景芹, 等. 交流接触器温度场仿真及试验验证[J]. 电子技术应用, 2014, 40(10):127-130.
[10]	郭庆, 郭建炎, 杨长洲, 等. 12kV气体绝缘开关柜热分析[J]. 电器与能效管理技术, 2017(21):48-53,66.
[11]	纽春萍, 陈德桂, 刘颖异, 等. 计及主回路和电磁系统发热的交流接触器数值热分析[J]. 中国电机工程学报, 2007(15):53-58.

序号	名称	试验温升/K	仿真温升/K	允许温升/K	误差率 /%
1	A相进线接线端	55.2	54.8	70	0.7
2	B相进线接线端	57.1	55.7	70	2.5
3	C相进线接线端	54.1	54.9	70	1.5
4	A相出线接线端	60.2	56.1	70	6.8
5	B相出线接线端	61.8	59.0	70	4.5
6	C相出线接线端	59.6	56.3	70	5.5
7	金属外壳(易触及)	7.8	7.2	30	4.8
8	内部空间	8.3	7.9	25	7.6

序号	名称	辐射换热/W	对流换热/W	辐射换热占总散热比例/%
1	A相进线铜排	13.3	36.7	26.6
2	B相进线铜排	13.5	36.5	27.0
3	C相进线铜排	13.3	36.7	26.6
4	A相出线铜排	1.1	1.7	39.3
5	B相出线铜排	1.1	1.7	38.6
6	C相出线铜排	1.1	1.7	37.9
7	A相熔断器	12.9	67.1	16.1
8	B相熔断器	13.0	67.0	16.3
9	C相熔断器	12.9	67.1	16.1
10	接触器	13.3	76.7	14.8

序号	名称	辐射换热占总散热比例/%
序号	名称	发射率为0.3	发射率为0.9
1	A相进线铜排	26.6	51.2
2	B相进线铜排	27.0	51.4
3	C相进线铜排	26.6	51.4
4	A相出线铜排	39.3	75.0
5	B相出线铜排	38.6	75.0
6	C相出线铜排	37.9	75.0
7	A相熔断器	16.1	33.5
8	B相熔断器	16.3	33.3
9	C相熔断器	16.1	34.0
10	接触器	14.8	31.4

[1]	XU Weidong, HE Wenzhi, LIAO Zhaoyi, LIU Qinfeng. Research and Application of Switchgear Temperature Load Based on Neural Network Algorithm [J]. LOW VOLTAGE APPARATUS, 2023, 0(3): 62-68.
[2]	WANG Haonan, CAO Yufeng, LAI Yaokang, HU Caixia, ZHANG Hongyu, WANG Zicheng, ZHAI Guofu. Thermal Analysis of SiC MOSFET Power Module Based on Die Package [J]. LOW VOLTAGE APPARATUS, 2022, 0(8): 39-43.
[3]	GE Shunfeng, LI Xinye, YANG Yunfei, WANG Maomao. Analysis on Temperature Rise Influence of Contactor Terminal [J]. LOW VOLTAGE APPARATUS, 2022, 0(8): 44-46.
[4]	WANG Guangxian, ZHAO Ruiying. Analysis on Application of Environmental Optimization SF₆ Alternative Gas in Medium and High Voltage Power Equipment [J]. LOW VOLTAGE APPARATUS, 2022, 0(8): 76-80.
[5]	YUAN Ruiming, LI Wenwen, PANG Fukuan, GUO Jiao, WANG Chen. Research on Electrothermal Coupling Simulation Method of Single-Phase IOT Smart Meter Metering Unit Based on Simulink and Ansys Icepak [J]. LOW VOLTAGE APPARATUS, 2022, 0(7): 73-79.
[6]	DAI Jianzhuo, JIA Yongyong, ZHANG Sicong, ZHAO Heng, SONG Siqi, CHU Zhaojie. Research on Fast Temperature Rise Test Method of Switchgear [J]. LOW VOLTAGE APPARATUS, 2022, 0(3): 81-85.
[7]	LAI Yaokang, WANG Haonan, CAO Yufeng, WANG Zicheng, YE Xuerong, ZHAI Guofu. Thermal Simulation and Design Optimization of Multi-Channel SiC Solid-State Power Controller [J]. LOW VOLTAGE APPARATUS, 2022, 0(2): 42-45.
[8]	YANG Kun, MA Shaohua, PANG Zheyuan, FENG Yuning. Design of Integrated Lighting Power Supply Heat Dissipation [J]. LOW VOLTAGE APPARATUS, 2022, 0(12): 32-37.
[9]	WANG Guoqing, XIONG Jun, JIAO Xianan, LIU Chun, ZHANG Yan, LIU Xun. Study on Temperature Rise Characteristics of Outdoor 1 000 A Low Voltage Fuse [J]. LOW VOLTAGE APPARATUS, 2021, 0(6): 36-40.
[10]	QU Jianyu, XU Hongyu. Simulation and Experimental Studies of Temprature-Rise Characteristics of Air Circuit Breaker [J]. LOW VOLTAGE APPARATUS, 2021, 0(4): 40-45.
[11]	JI Xinhua, ZHENG Bin, ZHANG Jie, ZHAO Qingqing. Analysis and Verification of Electrical Durability of AC Contactor [J]. LOW VOLTAGE APPARATUS, 2021, 0(4): 59-62.
[12]	YANG Wenqiang, ZHANG Penghe, ZHANG Baoliang. Temperature Rise Prediction and Simulation Analysis of Miniature Circuit Breaker [J]. DIANQI YU NENGXIAO GUANLI JISHU, 2020, 0(6): 25-29.
[13]	HAO Shuang, CAO Yundong, GENG Lina, CUI Juyong, LI Jing. Research on Simulation of Time-Varying Temperature Field of Multi-Core Arrester [J]. DIANQI YU NENGXIAO GUANLI JISHU, 2020, 0(3): 23-27.
[14]	ZHANG Yingying, SHEN Haiying. Research on Qualification Test of Moulded Case Circuit Breaker in American Naval Ships [J]. DIANQI YU NENGXIAO GUANLI JISHU, 2020, 0(3): 92-96.
[15]	HU Jinli, LU Weimin, JIANG Yifei. Simulation Study on Temperature Rise of Bimetal in MCB [J]. LOW VOLTAGE APPARATUS, 2020, 0(12): 60-66.